Solution Library

SOLUTIONStorage Rack Roll Forming Solution

Storage Rack Roll Forming Solution

Pallet-rack P-beam mill with bottom laser weld. Example: 26 stands, 1-1.5 mm, 6 kW laser, 380 V / 60 Hz. Upright forming mills and brace lines are separate hosts; a punch die is tooling.

5 views0 likes

SOLUTIONSolar Mounting Roll Forming Solution

Building & ConstructionSolar Mounting

Solar Mounting Roll Forming Solution

Solar strut / hat-bracket mill for PV mounting. Example: 24 stands with cooling, Dia. 70, servo tracking cut, 380 V / 60 Hz. Main rails and ground posts are separate hosts.

5 views0 likes

SOLUTIONCable Tray Roll Forming Solution

Building & ConstructionCable Tray

Cable Tray Roll Forming Solution

Cable tray / ladder line, 50-600 mm width. Example: 1-2 mm, 200 t punch, 6-10 m/min, 380 V / 50 Hz. Perforated and wire-mesh trays are separate quotations.

2 views0 likes

SOLUTIONGuardrail and Fence Roll Forming Solution

Building & ConstructionGuardrail and Fence

Guardrail and Fence Roll Forming Solution

Highway W-beam guardrail line with 2-wave / 3-wave swap modules. Example: 3.0 mm strip, 15 or 20 passes, 10 t decoiler, 380 V / 50 Hz. Posts and mesh fence are separate hosts.

1 views0 likes

SOLUTIONC/Z Purlin Interchange Line Solution

Building & ConstructionPurlins & Sections

C/Z Purlin Interchange Line Solution

C/Z interchangeable purlin line for plants that run both C and Z. Dedicated C or Z hosts if year-one mix is one section. Punching and voltage follow the drawing and the site.

2 views0 likes

SOLUTIONDoor Frame Roll Forming Solution

Building & ConstructionDoor Frame System

Door Frame Roll Forming Solution

Automatic door-frame / jamb mill. Example below: 22 stands, 7.5 kW x2, 0.8-1.5 mm, 380 V / 60 Hz. Rolling-shutter slats and sectional panels are separate hosts.

0 views0 likes

SOLUTIONGutter and Downspout Roll Forming Solution

Building & ConstructionGutter & Downspout

Gutter and Downspout Roll Forming Solution

Paired rainwater package: K-style / half-round gutter plus lock-seam downpipe, with bend / neck fittings. Example: 312 mm feed, downpipe 22 stands, 380 V / 60 Hz. Square downpipe mills are a separate quotation.

2 views0 likes

SOLUTIONSandwich Panel Production Solution

Building & ConstructionSandwich / Composite Panel

Sandwich Panel Production Solution

Continuous EPS and rock-wool sandwich line. Example below: 1220 mm feed, 19 stands, dual 5 t decoilers, 220 V. PU foam and cold-room panels use their own quotations.

2 views0 likes

SOLUTIONWall Cladding Roll Forming Solution

Building & ConstructionRoof & Wall Systems

Wall Cladding Roll Forming Solution

Horizontal hanging cladding line, 300 mm feed. Narrow side-punch wall panel is a different host. Example below: 20 stands, 0-15 m/min, 3 t hydraulic decoiler, 380 V / 50 Hz.

1 views0 likes

SOLUTIONLight-Gauge Keel Roll Forming Solution

Building & ConstructionDrywall Keel System

Light-Gauge Keel Roll Forming Solution

Light-gauge keel package: partition stud and track, ceiling T-grid, furring, or a villa frame line. Example below is a high-speed stud-and-track mill: 4+16 stands, 0.39-0.81 mm, up to 70 m/min.

0 views0 likes

SOLUTIONFloor Decking Roll Forming Solution

Building & ConstructionFloor Decking

Floor Decking Roll Forming Solution

Dual-layer floor-deck line: two profiles on one host, one layer live at a time. Example: 23+31 stands, path brake, 240 V / 60 Hz. High-speed gearbox decks are a separate quotation.

3 views0 likes

SOLUTIONMetal Roofing & Wall Panel Roll Forming Solution

Building & ConstructionRoof & Wall Systems

Metal Roofing & Wall Panel Roll Forming Solution

Trapezoidal / IBR, standing-seam, corrugated or glazed-tile roof and wall panel lines from coil. Lock the first-year profile before curving, stacker and trim.

3 views0 likes