Hang or punch
Hang or punch
horizontal hanging cladding and a narrow side-punch wall panel are different hosts.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Solution Library / Roof & Wall Systems
Wall Cladding Roll Forming Solution
Horizontal hanging cladding line, 300 mm feed. Narrow side-punch wall panel is a different host. Example below: 20 stands, 0-15 m/min, 3 t hydraulic decoiler, 380 V / 50 Hz.
Who it's for
Metal building and facade plants that roll wall cladding from coil and need a clear host before mixing roof sheets or insulated sandwich.
Feed width
Feed width
lock the strip width from the drawing before any speed claim.
Fastener style
Fastener style
exposed hang vs concealed-fastener wall is a different package.
How to choose a line
- Horizontal hanging cladding, about 300 mm feed -> Horizontal cladding line (Example specification on this page)
- Narrow wall panel with side punch (e.g. about 312 mm) -> Narrow wall panel line (Separate quotation; not the 300 mm hanging example)
- Concealed-fastener wall cladding -> Concealed wall package (Ask for that package)
- First-year tonnage is trapezoidal / IBR / standing seam / glazed tile -> Metal roofing solution (Different product family)
- Insulated sandwich / composite wall -> Sandwich panel solution (Core, skins and press are not this host)
Example specification
One delivered example. Final numbers follow your quotation.
| Example line | Horizontal hanging cladding host from a delivered specification |
|---|---|
| Material | Color coil 0.32-0.5 mm; feed width 300 mm (mandatory on this example) |
| Decoiler | Hydraulic 3 t; ID 480-520; max coil width 400; motorized expand; speed sensor |
| Former | 350H / shaft Dia. 75 solid / 45# quench chrome keyed rolls / 20 stands / 5.5 kW / dual chain |
| Speed | 0-15 m/min on this example |
| Cut / out | Hydraulic cut, 3 kW air-cool, Cr12; 3 m outfeed table |
| Power / HMI | 380 V / 50 Hz / 3-phase; Siemens HMI / Omron counter / Schneider / EN and ZH |
| Site note | This example specification calls out anti-rust for high heat and humidity |
Line walkthrough
1Uncoiling
Uncoiling
Hydraulic decoiler, 3 t class, with speed sensor and motorized expand.
- Hydraulic decoiler 3 t
2Form
Form
20 stands, Dia. 75 solid shafts, keyed chrome rolls, dual chain, 5.5 kW.
- Horizontal cladding former
3Cut to length
Cut to length
Hydraulic cut, Cr12, 3 kW air-cool, for square cladding joints.
- Hydraulic shear
4Outfeed
Outfeed
3 m table on the example order.
- 3 m outfeed table
Equipment matching
| Step | Module | Guidance | Related |
|---|---|---|---|
| Primary | Horizontal hanging cladding line | 300 mm feed / 20 stands / 0-15 m/min / 3 t hydraulic decoiler | Horizontal wall cladding forming |
| Alternative | Narrow side-punch wall panel line | Example: 312 mm feed / 18 stands / side roll-punch / ~25 m/min excl. shear; separate quotation | Wall panel forming |
| Related product | Concealed-fastener wall package | Ask for that package; no numbers on this page | |
| Infeed | Hydraulic decoiler | Example: 3 t / ID 480-520 / max coil width 400 | Hydraulic decoiler |
| Out | Outfeed table | Example: 3 m |
What's included
Horizontal hanging cladding vs narrow side-punch wall panel vs concealed-fastener wall, one 300 mm hanging-cladding specification, equipment matching, and a quote checklist.
What to send for a quote
- Year-one mix: hanging cladding vs narrow punched wall panel vs concealed-fastener wall
- Profile drawings plus lap / hang card and fastener style
- Coil: thickness window, coating, yield, and the mandatory feed width
- Whether side punch and scrap clearer are required
- Site voltage / frequency / phase (example line 380 V / 50 Hz)
- Climate / anti-rust package if the destination is hot and humid
- HMI languages (example line EN and ZH) and brand of PLC / HMI
Check before you quote
Roof sheets stay on the roofing page
Roof sheets stay on the roofing page
Trapezoid / IBR / standing seam / glazed tile belong on the metal roofing solution.
300 mm hang vs 312 mm punch
300 mm hang vs 312 mm punch
Horizontal hanging cladding and a narrow side-punch wall panel are different hosts. Each feed width stays on its own quotation.
Insulated sandwich is another package
Insulated sandwich is another package
Sandwich / composite wall needs skins, core and a press.
FAQ
Can one wall machine make hanging cladding and a punched wall panel?
Horizontal hanging cladding and a narrow side-punch wall panel are different hosts. The example below is the 300 mm hanging line.
Where do 300 mm and 20 stands come from?
From the quotation that matches that delivered hanging-cladding line. The 312 mm side-punch wall panel uses its own file.
Is this the same as a metal roofing line?
Trapezoid, standing seam, corrugated and glazed tile belong on the roofing solution. This page is wall cladding.
How are price and lead time quoted?
Send the quote checklist. Commercial terms come back on the offer.
Q&A for this solution
No questions yet