ZHJ Emboss Combined Slitting and Cut-to-Length Line

1. Definition

A ZHJ emboss combined line adds a pattern emboss station to a slit/CTL all-in-one host. It can emboss, slit/recoil strips, and cut leveled sheets to length on one machine. It is not a pure slitter, not a pure CTL, and not the non-emboss ZHJ at the same rating.

Compared with standard ZHJ×1300, the emboss reference is more conservative on thickness, speed, and strip count while listing a higher total motor figure.

2. Process and applications

Typical flow wording from FAQ:

1. Load coil
2. Level / slit / CTL integrated host with emboss
3. Convey
4. Damp separator
5. Recoil (strip mode) or sheet exit (CTL mode)

Applications. Patterned sheet or strip for architectural, appliance, or decorative coil products where emboss geometry must stay on the same footprint as slit/CTL. Buyers who only need plain slit or plain CTL should stay on standard ZHJ or dedicated CTL/slitter families.

3. Reference parameters vs standard ZHJ

Model naming conflicts (0.3–3 vs 0.5–3 vs 0.3–5) in the broader ZHJ family must be resolved in the contract — do not publish one forced band for emboss either.

4. Boundaries (related machines)

• Standard ZHJ×1300 — Same combo idea without emboss; higher speed/strip allowances on FAQ.
• Pure CTL tiers — No emboss, no multi-strip recoil integration.
• Pure slitter — No emboss station as defined here.
• Standalone embossing mill — Offline pattern unit; different commercial path.
• Industry CTL with optional emboss modules — Market context only; keep commercial numbers on FAQ above.

5. Buyer FAQ

Is emboss ZHJ just standard ZHJ with a roller swap?

No. FAQ treats emboss as a distinct variant with different thickness, speed, strip, and total motor references.

Why is total motor higher if speed is lower?

The emboss station adds load. FAQ cites about 81 kW total versus about 70 kW on standard ZHJ — do not invent a deeper energy model beyond that.

Can I quote ≤8 strips on emboss ZHJ?

No. Emboss reference is up to about 5 strips. The ≤8 figure belongs to standard ZHJ.

Does emboss change the CTL vs slit mode story?

Modes remain combo-class (recoil or sheet exit). Emboss sits in the integrated path; still confirm station order on the proposal.