- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Rack Upright and Beam Roll Forming Machines
rack upright machine · warehouse rack beam · supermarket beam roll forming · pallet rack column1. Upright is not beam
Pallet-rack and supermarket steel frames need uprights (columns), beams, braces and often shelves. “Rack upright machine,” “warehouse rack beam,” “supermarket beam” and “pallet rack column” searches land on one inquiry, but the roll path, stand count, thickness and power are not interchangeable.
These are different machines: upright ≠ beam ≠ brace ≠ shelf/pallet. A punch die kit alone is not a full line.
2. Upright option1 (named quotation)
| Item | On option1 quotation |
|---|---|
| Speed | 0–10 m/min |
| Form power | ~22 kW dual Siemens |
| Hydraulic | ~5.5 kW |
| Total package | ~40 kW |
| Stands / shaft | ~16 stands, φ70 |
| Mass | ~17 t |
| Thickness (on that quote) | Written 3 mm |
| Drive / lube / PLC | Gear + drip oil; Delta PLC |
3. Upright variants — label them
Other upright quotations exist. They are variants, not corrections to option1:
| Variant | Documented numbers |
|---|---|
| Option2 | 0–6 m/min; host ~15 kW; chain drive |
| Bangladesh | 0–14 m/min; thickness 1.5–2.3 mm |
| Supermarket upright speed class | 5–10 m/min |
These variants are not one “typical upright” — option1 gear/22 kW is not option2 chain/15 kW.
4. C-beam line
| Item | On that beam quotation |
|---|---|
| Speed | 0–12 m/min |
| C-beam host | ~11 kW |
| Hydraulic | ~4 kW |
| Total | ~15 kW |
| Stands / shaft | ~14 stands, φ70 |
| Mass | ~6.4 t |
| Thickness | ~2 mm |
| Section example | 50/100 × 45/50 |
| Drive / PLC | Chain + Delta |
This C-beam host is not the upright option1 dual-Siemens package and not the box/closing second stage below.
5. Box / closing beam — two stages
Closed or box beams are documented as a C stage then a closing stage, not as one motor on one mill:
| Stage | Speed band | Power on that documentation |
|---|---|---|
| C stage | 4–12 m/min | Host 15 kW; hyd 5.5 kW |
| Closing stage | 4–8 m/min | Another ~11 kW |
Quote both stages — there is no single “box beam host kW” without naming the stage.
6. What is not on this page
- Brace lines — separate from upright and beam.
- Shelf / pallet panel lines — not upright or beam mills.
- Punch die kit alone — tooling is not a full roll-forming line.
- Upright option1 numbers do not transfer to a C-beam or closing stage.
7. Send column and beam as separate drawings
- Upright section, thickness and hole pattern — say which variant class (option1 / option2 / Bangladesh / supermarket)
- Beam type: open C vs box/closing; section (e.g. 50/100 × 45/50 class)
- Whether brace or shelf lines are also required
- Speed target inside the labeled bands — each band stands alone
- Drive preference only when it matches a named variant (gear vs chain)
- PLC / brand preferences if they must match an existing plant standard
8. Buyer FAQ
Can one mill make uprights and beams by changing rolls?
Not as a default catalogue claim. Upright and beam are different lines with different stands, thickness and power packages on the quotations above.
Is option2 just a cheaper option1?
They are labeled variants: option2 is 0–6 m/min, host ~15 kW, chain — not the option1 0–10 / ~22 kW dual Siemens / gear package.
What is the motor size of a box beam line?
Two stages: C host 15 kW + hyd 5.5, then closing another ~11 kW — not one motor.
Is a punch die set enough to start production?
No. A punch die kit alone is not a full line.
kW, stands, shaft, mass, speed and thickness above come from option1 upright, named upright variants, C-beam and box/closing stage quotations.
References
- Upright option1: 0–10 m/min; form ~22 kW dual Siemens; hyd ~5.5; total ~40; ~16 stands φ70; ~17 t; thickness 3 mm on that quote; gear + drip oil; Delta PLC
- Upright variants: option2 0–6 / host ~15 / chain; Bangladesh 0–14 / 1.5–2.3 mm; supermarket 5–10
- Beam: 0–12 m/min; C-beam host ~11; hyd ~4; total ~15; ~14 stands φ70; ~6.4 t; thickness ~2 mm; section 50/100×45/50; chain + Delta
- Box/closing: C stage 4–12, host 15 / hyd 5.5; closing 4–8, another ~11
- Scope: upright ≠ beam ≠ brace ≠ shelf/pallet; punch die kit ≠ full line
References
- Upright option1: 0–10 m/min; form ~22 kW dual Siemens; hyd ~5.5; total ~40; ~16 stands φ70; ~17 t; thickness 3 mm on that quote; gear + drip oil; Delta PLC
- Upright variants: option2 0–6 / host ~15 / chain; Bangladesh 0–14 / 1.5–2.3 mm; supermarket 5–10
- Beam: 0–12 m/min; C-beam host ~11; hyd ~4; total ~15; ~14 stands φ70; ~6.4 t; thickness ~2 mm; section 50/100×45/50; chain + Delta
- Box/closing: C stage 4–12, host 15 / hyd 5.5; closing 4–8, another ~11
- Scope: upright ≠ beam ≠ brace ≠ shelf/pallet; punch die kit ≠ full line