- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Anode Collecting Plate Roll Forming Line
Table of Contents
- Definition
- Typical process flow
- Technical parameters (FAQ baseline)
- Conflicts and open items
- Related machines
- Applications
- Buyer FAQ
- References
1. Definition
An anode / collecting plate roll forming line cold-forms steel strip into custom ESP (electrostatic precipitator) anode — collecting electrode — sections. It is a custom-profile industrial line, not a roof panel, floor deck, or highway guardrail machine. Document titles also appear as “735 Anode Plate Roll Forming Machine.”
Market collecting-electrode lines often add leveling and servo punching for mounting holes; those stations belong only when the proposal includes them.
2. Typical process flow
FAQ baseline sequence (English parameter-page wording):
- Hydraulic decoiling
- Entry bridge / feed table (entry beach)
- Main roll forming
- Hydraulic cut-to-length
- Exit / collect table
See also the dedicated process-flow encyclopedia entry for station-by-station notes.
3. Technical parameters (FAQ baseline)
| Item | Typical value |
|---|---|
| Forming speed | About 8–10 m/min |
| Thickness | About 2.0–3.0 mm |
| Finished plate / strip width | About 190–420 mm |
| Material | Q215 / Q235 / Q345 class; yield strength about 195–350 MPa |
| Decoiler hydraulic / drive | About 3 kW each |
| Shear hydraulic station | About 3 kW |
| Main forming motor | Not listed as a single public value — confirm on proposal |
| Host envelope | About 6.2 × 1.45 × 1.5 m, about 5 t |
| Entry bridge | 45# shafts; about 4 upper / 3 lower; shaft about φ100 mm |
| Decoiler capacity | ID about 450–550 mm; OD about 1300–1600 mm; max coil width about 1250 mm; load about 10 t |
| Controls (that quote) | Mitsubishi PLC class + touch screen; Omron-class length encoder |
Hydraulic oil grade is written as 40# on that source page. Voltage follows the customer requirement.
4. Conflicts and open items
- Speed — FAQ baseline is about 8–10 m/min. Some auto-generated wiki summaries and public vendor sheets cite higher bands (examples about 15–20 m/min). Publish the FAQ baseline here; treat other numbers as other configurations.
- Finished width — FAQ finished band is about 190–420 mm. Do not replace it with decoiler max coil width (~1250 mm), and do not shrink it to a narrower invented band.
- Main forming kW — unsupported as a single public rating on the FAQ source; confirm on the technical proposal.
- Drive type (gear vs chain) — not locked in the FAQ body; contract wins.
5. Related machines
- Roof / wall panel lines — different product family (01-ROOF-PANEL neighbors)
- Highway two- / three-wave guardrail lines — different package
- Handrail secondary forming — separate soft model even if filed nearby
6. Applications
ESP anode / collecting plate production for dust collection and gas purification equipment. Exact section and hole map follow the customer drawing and contract.
7. Buyer FAQ
Is this a roof sheet machine?
No. It forms ESP collecting-plate sections from heavier strip.
Why is main motor power missing?
Because the documented parameter page does not list a single forming-motor kW. Confirm on the proposal instead of inventing one.
Is 1250 mm the plate width?
No. About 1250 mm is decoiler coil-width capability. Finished collecting-plate width on the FAQ baseline is about 190–420 mm.
Final ratings follow the confirmed technical proposal. Price and lead time are out of scope.
References
- ANODE-PLATE thematic FAQ (735 Anode Plate class parameter page)
- Related encyclopedia: ESP anode collecting plate process flow
- Industry ESP anode-plate context: Anode plate / collecting electrode roll forming machine