Weight
Name coil weight first
5 t manual, 7 t electric and 10 t hydraulic are three hosts.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Solution Library / Building & Construction
Heavy Coil Handling Solution
Coil infeed is a weight class plus a drive: manual expand, electric expand with VFD, hydraulic 10 t with car, or a dual-head that parks a second coil. The example below is a 7 t electric decoiler. A 10 t loading car and a 10 t upender are different machines from the decoiler.
Who it's for
Roll-forming shops that change coils often, run 10 t floor-deck coils, or want a second coil ready on a dual-head — and plants that need a car or upender as a separate line item.
Changeover
Dual-head parks a second coil
4 t per side is not a 10 t single-mandrel machine.
Car
Loading car is its own machine
0.9 m lift, 5.5 kW, 380 V / 50 Hz on that quotation, a separate line from the decoiler motor.
How to choose a line
- Light coil, hand expand, friction brake -> 5 t manual (no VFD on that class)
- Electric expand, four-petal, VFD -> 7 t electric (example below)
- Floor-deck / heavy coil with hydraulic expand, press arm, remote, brake -> 10 t hydraulic decoiler, speed sensor, 220 V 3φ on that package
- Second coil ready while the first runs -> dual-head 4 t per side, 400 mm / 3 mm, 50 m/min, 440 V / 60 Hz on that quotation. (Keel package 3 t; CTL 25 T dual-head; sandwich uses two independent 5 t machines.)
- Lift the coil onto the mandrel -> 10 t loading car (0.9 m, 5.5 kW, 380 V / 50 Hz)
- Turn a coil from eye-to-sky -> 10 t upender, 240 V / 60 Hz / 1φ on that quotation
- Level and cut after decoil -> sheet-processing solution. The 15-roll 45 kW leveller pairs with a 30 T cone-head, not the 10 t hydraulic decoiler package
Example specification
One delivered example. Final numbers follow your quotation.
| Capacity | 7 t electric, four-petal expand |
|---|---|
| Motors | 3 kW + 4 kW VFD |
| Power on that order | 350 V / 50 Hz |
Line walkthrough
1Step 1
Step 1
Land the coil by crane or loading car (the car is a separate machine).
2Step 2
Step 2
Expand the four petals and drive with 3 kW + 4 kW VFD.
3Step 3
Step 3
Hold a loop the mill can live with.
4Step 4
Step 4
Stop to reload. Dual-head parks a second coil at 4 t per side; 10 t hydraulic is another package.
Equipment matching
| Step | Module | Guidance | Related |
|---|---|---|---|
| Hand expand | 5 t manual | Friction brake; no VFD | Hydraulic decoiler |
| Electric expand | 7 t electric | 3+4 kW VFD; 350 V / 50 Hz on that order | 7 t electric |
| Heavy hydraulic | 10 t hyd decoiler | Sensor, press arm, remote; 220 V 3φ | 10 t hyd decoiler |
| Park a second coil | Dual-head | 4 t/side; 50 m/min; 440 V / 60 Hz | Dual-head |
| Lift onto mandrel | 10 t car | 0.9 m; 5.5 kW; 380 V / 50 Hz | 10 t car |
| Upend | 10 t tilter | 240 V / 60 Hz / 1φ | 10 t tilter |
What's included
Weight and drive choice, one 7 t electric example, 10 t decoiler / car / upender and dual-head as matching rows, and a quote checklist.
What to send for a quote
- Max coil weight, ID / OD, strip width and thickness
- Manual vs electric vs hydraulic expand
- Single mandrel vs dual-head (and t per side)
- Whether a loading car or upender is a separate line
- Site voltage / frequency / phase (examples on this page include 350 V, 220 V 3φ, 440 V / 60 Hz, 380 V / 50 Hz, 240 V / 1φ)
- Host mill: roof, floor deck, keel, CTL or sandwich (sandwich is two 5 t machines)
- If you also need levelling: send that as a CTL RFQ — the 15-roll 45 kW file pairs with 30 T
Check before you quote
10 t
Three 10 t machines
Hydraulic decoiler, loading car and upender are three quotations. Voltage differs on each file.
Dual
4 t + 4 t is per side
It is not a 10 t single-mandrel decoiler. CZ process language also lists 6 t/head.
Level
10 t decoiler ≠ 15-roll leveller
The 45 kW / 15-roll file is paired with a 30 T cone-head on that quotation.
FAQ
Is an automatic decoiler the same as a 10 t decoiler?
Automatic usually means motorised expand and VFD — the 7 t example. 10 t hydraulic is a heavier package with its own voltage.
Does dual-head replace a 10 t machine?
Dual-head is two lighter mandrels for changeover. Capacity is quoted per side.
How are price and lead time quoted?
Send the quote checklist. Commercial terms come back on the offer.
Q&A for this solution
No questions yet