Cut to Length Machine Sheet Metal Shearing and Cutting Equipment ZT cut to length machine line

steel metal cutting line automatic cut to length line cutting sheet machinee

 This cut to length machine is included below parts:

1  hydraulic decoiler. this decoiler is by the hydraulic power to small and big the inner diameter of the steel coil. then the steel coil is run into the bevelling by the pushing of the electric.

 

 

 

2 The levelling system is to make the sheet be tidy and neat and flat before feeding into the feeding system.then be filled in to the feeding system.

 

 

 

The sheeting cutting system, this part is controlled by the PLC system, so the sheet can be cut to set length, and with differnt thickness, you can adjust the gap distance to fit diffrent thickness.

 

 

last part is the cutted sheet receiving table and packaged machine as below:

 

 

The metal cutting machine steel coil cutting machine cut to length machine can be used cut the metal sheet to a certain size to form a cetains size, for example, The metal cutting machine steel coil cutting machine cut to length machine cut the sheet to a certain size used to make the air fans and air heating system. The metal cutting machine steel coil cutting machine cut to length machine can cau different material . for example, the galvanized steel, the stainless stell, the sold rolled steel, the aluminum sheet . The raw material thickness can be 0.5 -3.0mm, can be 12 mm, and can be as thick as 15 mm. The precision of the cut to length machine line can be as 1.0 mm and 0.5 mm.

 

 

 

The raw material specifications:
a) Galvanized steel – 0,5 mm…3,0 mm
b) Stainless steel – 0,5 mm…2,5 mm
c) Cold rolled steel – 0,5 mm…3,0 mm
d) Aluminum – 0,5 mm…2,0 mm

e)Cutting precision : 1.0 mm/two meters 0.5mm/one meter

 

 

No	Name	Unit	Parameter
1	Materials		CRS, GI, SS, Aluminum
2	Thickness	mm	0.5-3.0
3	Width	mm	1250
4	Coil I.D.	mm	Φ508
5	Coil weight	MT	6
6	Max speed	m/min	20
7	Cutting precision	Mm	1.0 mm/two meters   0.5mm/one meter
8	Leveling roll	piece	Upper 8 / Lower 9
9	Feeding roll	piece	Upper 1/ Lower 1
10	Diameter of leveling rollers	mm	Φ65mm
11	Distance of leveling rollers	mm	70mm
12	Material of leveling roller		GCr15
13	Diagonal tolerance	mm	≤±2mm/2000mm
14	Length tolerance	mm	≤±1mm/2000mm
15	Power		380V/50HZ/3PH
16	area of the whole line(about)		15m(L)X5m(W)
17	The direction of whole line		Depends on Customers'
18	The color		customized

 

II. Brief introduction

JPX-(0.5-3)X1250 cut to length line is mainly used to the uncoiling, leveling and shearing of the steel coils and prepare for the next process.

1. Mechanical de-coiler x 4

 Supporting the coils and doing uncoiling.

It is designed with manually to expand and shrink.

7.5kw motor drive the coils running and can do forward and reverse running as well as do the decoiling with tension.

The core can ensure the expand range φ508 of the coils inner diameter.

Structure: welding by the steel plates and profiled bar.

The capacity is 6 tons .

 

 

2. Fourfold straightening machine

It is composed of 17 leveling rollers, 2 groups of supporting rollers, driving device and 2 pinch code rollers and frame. Both sides of each rolling wheel is transmitted by needle pins all are the main force rollers. The total quantity of the rollers is 19, the diameter is φ65 and the distance between the rollers is 70mm, with supporting rollers. All the rollers are after hard chrome plating to protect the stainless steel plate surface is not wear.

The function of the supporting roller is to balance the leveling rollers force and reduce the friction to the rollers.

 

The working rollers can be adjusted the gap electrically which is controlled by 2 hand wheel to ensure the leveling quality.

Driving model: all the independent rollers and gear box are driven by 30Kw frequency control motor.

Name	Specification	Quantity
Leveling roll	Diameter: φ65mm	17
Feeding roll	Rubber coated roll	2
Motor	30KW frequency control motor	1
Decelerator	JZQ650	1
Tensile Strength	400N-450/mm
Yield Strength:	275N/mm

 

3. 3X1250 Hydraulic cutter

Shear model: cut from up to down hydraulically which is cooperate with the signal direct from the feeder and shear automatically.

Adopt gap adjusting design to cut the materials and can shear 3mm steel plate safely after heat treatment. 

Machine line is with the auto gap adjusting system.

 

 

 

III. The foundation engineering of the equipment

 

The seller will provide the buyer the foundation plan of the equipment in 30 days after signing contract.

 

The construction and monitoring of all the foundation engineering of the equipment are in the control of the buyer.

 

The foundation holes are reserved holes, to match the foot holes of equipment.

 

After the equipment has been installed, the buyer is responsible for the foundation hole irrigation mud.

 

 

6. Remark 

 

1. In the guarantee equipment main technical parameters and installed level, the user and consultation, and manufacturing process has the right to modify some parameters

 

2. Seller needs to supply following items:

 

    Mechanical foundation installation drawing and production line arrangement as well as the operation manual.

 

 

 

 

Machine pictures in our customer's workshop, which is now been installing:

 

 

 

There are also simple metal sheet cutting machine, sheet length cutting machine, this simple machine is very simple, but with thin thickness and need manual cooperating, with low cost.

 

 

7. Contact details:

 

 

 

Factory name: ZHONGTUO ROLL FORMING MACHINERY CO., LTD

 

 

 

Address: BAZHOUTOWN,CANGZHOU CITY, HEBEI PROVINCE, CHINA