Build
Build
Door panel forming linewith dual flip-bend.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Specialty Section Forming
Sectional / Door Panel Forming
The two flip-bend stations after cut are the signature of this panel line — distinct from a coiled slat curtain.
What this process looks like
The two flip-bend stations after cut are the signature of this panel line — distinct from a coiled slat curtain.
Material
Material
GI / carbon · t0.8–1.0 mm.
Flow
Flow
Decoiler → leveler → servo feed → punch → former → cut → convey → flip-bend → convey → flip-bend → out.
Specifications
| Build | Door panel forming linewith dual flip-bend. |
|---|---|
| Material | GI / carbon · t0.8–1.0 mm. |
| Flow | Decoiler → leveler → servo feed → punch → former → cut → convey → flip-bend → convey → flip-bend → out. |
| Punch | Cantilever hyd · ~5.5 kW · 3 stations / 3 dies · Cr12MoV. |
| Former / cut | ~14 stands· ~7.5 kW· ~300 pcs/h · hyd cut ~3 kW. |
| Infeed | ≤6 t hyd decoiler · leveler ~2.2 kW · Yaskawa/Delta servo feed. |
| Controls / color | Xinje PLC · Fancy HMI · ZH+EN · blue/yellow. |
| Electrics note | Sheet header shows 380 V / 50 Hz; confirm the live nameplate on film. |
| Sibling | Same-order fire-damperboxline is covered on its own page. |
Operation steps
Servo feed + punch
Servo feed + punch
Three dies / Cr12MoV — punch pattern sets the panel holes.
Form ~14 stands
Form ~14 stands
Panel section forms after punch.
Cut then flip-bend
Cut then flip-bend
Two flip-bend stations after cut are the line's signature.
Output rate
Output rate
~300 pcs/h is the sheet claim — film shows paced production.
Panel identity
Panel identity
Both bent ends confirm a sectional panel, not a box body.
Line boundary
Line boundary
This is the panel line — separate from slat and jamb lines.
What's included
This line
Door panel linewith punch + ~14-stand form + dual flip-bend.
Standard build
Decoiler, leveler, servo feed, punch, forming, cut, and two flip-bend conveyors — one continuous flow.
Key details
Flip-bend panel vs coiled slat
different specification.
Same order, different machines
the box line has its own page.
FAQ
What material and thickness range does this line run?
GI / carbon · t0.8–1.0 mm.
How fast does the line run and how is the sheet cut to length?
~14 stands· ~7.5 kW· ~300 pcs/h · hyd cut ~3 kW.
What control system does the machine use?
Xinje PLC · Fancy HMI · ZH+EN · blue/yellow.
Related processes
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote