Source
Source
Order package · gutter cover RFM.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Specialty Section Forming
Gutter Cover / Leaf Guard Forming
Pattern punch, then form the lid that sits on the gutter—dry-fit is the key visual.
What this process looks like
Pattern punch, then form the lid that sits on the gutter—dry-fit is the key visual.
Material
Material
PPGI · 0.4–0.5 mm.
Punch
Punch
55 t · servo feed · Cr12 die ×1 · 0–30 m/min.
Specifications
| Source | Order package · gutter cover RFM. |
|---|---|
| Material | PPGI · 0.4–0.5 mm. |
| Punch | 55 t · servo feed · Cr12 die ×1 · 0–30 m/min. |
| Form | 13 st · shaft Ø50 · main 7.5 kW · ≥20 m/min. |
| Cut / outfeed | Hyd stop-cut 5.5 kW · auto flip stack · 240 V / 60 Hz / 3φ. |
Operation steps
Hydraulic decoiler + level
Hydraulic decoiler + level
3 t, ID 450–550, leveler on the same line.
Punch the cover pattern
Punch the cover pattern
55 t + servo feed. Match the pattern board to the approved spec.
Form 13 stations
Form 13 stations
Ø50 / Cr12 / ≥20 m/min gear drive.
Hydraulic stop cut
Hydraulic stop cut
5.5 kW hyd, Cr12 blade, servo pump 1.5 kW.
Auto flip stack
Auto flip stack
4 m arm—verify the dry-fit on gutter sample after nest.
What's included
This line
Gutter cover / leaf-guard punch + form + stack line.
FAQ
What material and thickness range does this line run?
PPGI · 0.4–0.5 mm.
How fast does the line run and how is the sheet cut to length?
Forming ≥20 m/min (punch feed 0–30 m/min); hydraulic stop-cut 5.5 kW with auto flip stack.
What power supply does the line use?
240 V / 60 Hz / 3φ.
Related processes
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote