SKU class
SKU class
4×4000 hydraulic swing-beam guillotine.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Punching / Shearing / Notching
Hydraulic Swing-Beam Guillotine
Backgauge → clamp → swing-beam cut → square check. Blade gap and rake angle decide burr and bow before any brake queue.
What this process looks like
Backgauge → clamp → swing-beam cut → square check. Blade gap and rake angle decide burr and bow before any brake queue.
Controls
Controls
E21Ssystem +VFD· control cabinet ·adjustable angle / rake.
Capacity
Capacity
Stainless ≤2 mm· carbon steel ≤4 mm· max shear width4.1 m.
Specifications
| SKU class | 4×4000 hydraulic swing-beam guillotine. |
|---|---|
| Controls | E21Ssystem +VFD· control cabinet ·adjustable angle / rake. |
| Capacity | Stainless ≤2 mm· carbon steel ≤4 mm· max shear width4.1 m. |
| Main motor | 7.5 kW. |
| Same order (out of scope) | Shutter coil / springs / motors / keys / plates / mesh — do not hero on this page. |
Operation steps
Stage sheet on front supports
Stage sheet on front supports
Seat against backgauge under the finger guard. Tag live alloy—SS vs CS capacity differs on this specification.
Set E21S length + rake
Set E21S length + rake
Cabinet adjusts angle. Wrong rake on thin SS bows the blank; wrong gap on 4 mm CS leaves a heavy burr.
Clamp and swing-beam cut
Clamp and swing-beam cut
Hold-down first, then full stroke. show the 7.5 kW / hydraulic side only as context—hero is the cut face.
Edge quality gate
Edge quality gate
Burr, bow, and coating bruise. Capacity law: SS ≤2 mm / CS ≤4 mm—over-gauge is a stop, not a “try.”.
Squareness first-off
Squareness first-off
Out-of-square blanks poison brake queues. Tape and square before stacking.
Stack for brake / fab queue
Stack for brake / fab queue
Tag blanks for the next specification (press brake if on order). Do not paste shutter-motor crate stills into this gallery.
Key details
Note 1
Publish both gauges. Filming only carbon-steel cuts hides the stainless limit on this specification.
Note 2
Shutter motors and springs share the specification—keep them on a different page or out of the gallery.
FAQ
What control system does the machine use?
E21Ssystem +VFD· control cabinet ·adjustable angle / rake.
What is the power and hydraulic configuration?
7.5 kW.
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote