Material
Material
Q235 / Q345 GI · 2–6 mm.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Purlin / Channel / Beam
Angle Steel Roll Forming
A thick-section angle line with hydraulic stop cut. The process forms equal-leg angle from 2–6 mm coil, cuts to length and drops pieces for manual stacking.
What this process looks like
A thick-section angle line with hydraulic stop cut. The process forms equal-leg angle from 2–6 mm coil, cuts to length and drops pieces for manual stacking.
Decoiler
Decoiler
Single-head manual 3 t.
Host
Host
25 mm mid-plate · Φ95 · 45# tempered shafts · bearing-steel rolls · 13 stands · 15 kW · 10 m/min.
Specifications
| SKU | Angle steel forming. |
|---|---|
| Material | Q235 / Q345 GI · 2–6 mm. |
| Decoiler | Single-head manual 3 t. |
| Host | 25 mm mid-plate · Φ95 · 45# tempered shafts · bearing-steel rolls · 13 stands · 15 kW · 10 m/min. |
| Cut / outfeed | Hydraulic stop cut · Cr12 · hyd 7.5 kW · 3 m auto drop · manual stack · remote. |
| Controls / power | Delta PLC · Schneider · Omron · ZH/EN · 415 V / 50 Hz / 3-phase. |
Operation steps
3 t manual decoil
3 t manual decoil
Pay off thick 2–6 mm coil on the single-head decoiler.
Form 13 stands · Φ95
Form 13 stands · Φ95
Bearing-steel rolls progressively form the angle legs on a 25 mm mid-plate frame.
Hydraulic stop cut
Hydraulic stop cut
7.5 kW hydraulic shear with Cr12 blade stops the strip for each cut.
3 m auto drop
3 m auto drop
Finished pieces leave on a 3 m drop table, then operators stack manually.
Remote operation
Remote operation
The line supports remote run per the order. Keep E-stop and pendant within reach.
Confirm angle profile
Confirm angle profile
Check leg length, inside radius and thickness against the drawing before full production.
What's included
This line
Angle steel former: 2–6 mm, 13 stands Φ95, 10 m/min, hydraulic stop cut, 415 V/50 Hz.
Key details
Quoted at 10 m/min
slower than typical purlin lines because of the thicker section.
FAQ
What material and thickness range does this line run?
Q235 / Q345 GI · 2–6 mm.
What auxiliary equipment comes with the line?
Single-head manual 3 t.
How is the forming frame built?
25 mm mid-plate · Φ95 · 45# tempered shafts · bearing-steel rolls · 13 stands · 15 kW · 10 m/min.
How fast does the line run and how is the sheet cut to length?
Hydraulic stop cut · Cr12 · hyd 7.5 kW · 3 m auto drop · manual stack · remote.
What control system does the machine use?
Delta PLC · Schneider · Omron · ZH/EN · 415 V / 50 Hz / 3-phase.
Related processes
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote