Frame / rolls
Frame / rolls
Mid-plate · 500H · mixed GCr15 quench chrome / bearing rolls / 45# chrome.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Roofing & Wall Panel
V-OL / OL-Series Panel Forming
OL board + 60 Hz electrics + filmed/plain material note. Keep the coil car off this page.
What this process looks like
OL board + 60 Hz electrics + filmed/plain material note. Keep the coil car off this page.
Drive / power
Drive / power
Chain · ≥7.5 kW main · 5.5 kW large-valve air-cool hydraulics ·380V / 60 Hz.
Cut
Cut
Four-pillar hydraulic cut· proximity switch on knife · entry chamfer on die.
Specifications
| SKU | V-OL250. |
|---|---|
| Frame / rolls | Mid-plate · 500H · mixed GCr15 quench chrome / bearing rolls / 45# chrome. |
| Drive / power | Chain · ≥7.5 kW main · 5.5 kW large-valve air-cool hydraulics ·380V / 60 Hz. |
| Cut | Four-pillar hydraulic cut· proximity switch on knife · entry chamfer on die. |
| Controls | Full SiemensorMitsubishi cabinet · Schneider LV ·KR / ZH. |
| Material note | Supports filmed coil and plain color steel — config same as prior V-OL250. |
| Same-order aux | Trackless electric coil car V-groove 1250–2000 OD — related only. |
Operation steps
V-OL250 board
V-OL250 board
Customer-confirmed profile beside machine.
60 Hz nameplates
60 Hz nameplates
Valve/motor/gearbox plates photographed per sheet checklist.
Mid-plate form
Mid-plate form
Roll surface check.
Four-pillar cut
Four-pillar cut
Show pillars + proximity switch + entry chamfer.
KR/ZH screens
KR/ZH screens
Translation check pages (sheet asks photos).
Coil car elsewhere
Coil car elsewhere
Trackless car is off the OL order spec.
Key details
Power & voltage
Only mobile decoiler lines survived earlier—restored from V-OL250 docx.
Note 2
Sheet checklist items 1–2 are electrical identity gates.
FAQ
How is the forming frame built?
Mid-plate · 500H · mixed GCr15 quench chrome / bearing rolls / 45# chrome.
What is the power and hydraulic configuration?
Chain · ≥7.5 kW main · 5.5 kW large-valve air-cool hydraulics ·380V / 60 Hz.
How fast does the line run and how is the sheet cut to length?
Four-pillar hydraulic cut· proximity switch on knife · entry chamfer on die.
What control system does the machine use?
Full SiemensorMitsubishi cabinet · Schneider LV ·KR / ZH.
What material and thickness range does this line run?
Supports filmed coil and plain color steel — config same as prior V-OL250.
Related processes
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote