Form / cut
Form / cut
17st · Cr12 ·stop-cut· ~15 m/min.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Specialty Section Forming
Trim Roll Former
The customer-confirmed trim board and the English-only panel are the key stills to capture.
What this process looks like
The customer-confirmed trim board and the English-only panel are the key stills to capture.
Power
Power
Main11+11 kW· hyd7.5 kW·240 V / 60 Hz / 1φ.
HMI / color
HMI / color
English only · white · Delta.
Specifications
| Form / cut | 17st · Cr12 ·stop-cut· ~15 m/min. |
|---|---|
| Power | Main11+11 kW· hyd7.5 kW·240 V / 60 Hz / 1φ. |
| HMI / color | English only · white · Delta. |
| Material | 0.4–0.7 mm· manual decoiler + receive table. |
Operation steps
Hang confirmed trim board
Hang confirmed trim board
Wrong silhouette fails the build.
Form 17 stations
Form 17 stations
Cr12 rolls, chain/gear drive.
Stop-cut to length
Stop-cut to length
15 m/min class stop shear.
English-only panel
English-only panel
Compliance photo—English glyphs only.
What's included
This line
Single Trim RFM with stop-cut and EN-only HMI.
Standard build
Multi-machine tile-accessory suites, drip-edge formers, and no-cutoff short accessories each run on their own dedicated lines.
FAQ
How fast does the line run and how is the sheet cut to length?
17st · Cr12 ·stop-cut· ~15 m/min.
What is the power and hydraulic configuration?
Main11+11 kW· hyd7.5 kW·240 V / 60 Hz / 1φ.
What control system does the machine use?
English only · white · Delta.
What material and thickness range does this line run?
0.4–0.7 mm· manual decoiler + receive table.
Related processes
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote