Build
Build
Container beam-2.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Specialty Section Forming
Container Beam / Member Forming
Section members with end punch prep. The hero is a gearbox 20-stand cast mill plus punch before hydraulic stop-cut.
What this process looks like
Section members with end punch prep. The hero is a gearbox 20-stand cast mill plus punch before hydraulic stop-cut.
Stock
Stock
1.5–3 mmGI / carbon steel.
Infeed
Infeed
5 thydraulic decoiler + X-car · ID470–530· width ≤600 mm· press arm · main 5.5 kW · hyd 4 kW.
Specifications
| Build | Container beam-2. |
|---|---|
| Stock | 1.5–3 mmGI / carbon steel. |
| Infeed | 5 thydraulic decoiler + X-car · ID470–530· width ≤600 mm· press arm · main 5.5 kW · hyd 4 kW. |
| Former | Entry pair · 7-roll leveler (upper 3 / lower 4) ·20stands · shaftØ8045# QT · GCr15 quench+chrome rollers · cast housings ·gearbox· 0–15 m/min ·22 kW Siemens. |
| Punch / cut | One punch station · hole sizeconfirmed per order· hydraulic stop-cut5.5 kW· Cr12 blade · air-cooled. |
| Controls / out | Siemens PLC/HMI · Schneider LV · Omron encoder · EN/ZH/FR · outfeed 3 m × 1 ·380 V/50 Hz / 3-phase. |
Operation steps
Load ≤600 mm coil on 5 t + X-car
Load ≤600 mm coil on 5 t + X-car
ID 470–530 · press arm · confirm capacity tags before forming heavy 1.5–3 mm strip.
Entry pair + 3/4 leveler
Entry pair + 3/4 leveler
Seven level rolls (upper 3 / lower 4) flatten the coil before the gearbox mill.
20-stand gearbox / cast housings
20-stand gearbox / cast housings
Ø80 shafts · GCr15 rollers · Siemens 22 kW · 0–15 m/min. Cast housings and gearbox drive are the key visual features.
Punch station (size confirmed per order)
Punch station (size confirmed per order)
Show the station working; keep hole dimensions unstated pending confirmation.
Hydraulic stop-cut
Hydraulic stop-cut
5.5 kW air-cooled hydraulic shear with Cr12 blade; 3 m outfeed table.
Section vs profile board
Section vs profile board
Match the beam silhouette to the drawing; container panel skins stay on the container panel page.
What's included
This line
Containerbeam/member: 1.5–3 mm, 5T+X-car, 20-stand gearbox, punch + hydraulic stop-cut, Siemens 22 kW.
Standard build
Containerpanel skin, CZM purlin, TR35 roof and arch beam lines are listed separately.
Key details
Note 1
Deep container panels are another machine and another process page.
Note 2
This build is gearbox-on-mid-plate.
FAQ
How fast does the line run and how is the sheet cut to length?
One punch station · hole sizeconfirmed per order· hydraulic stop-cut5.5 kW· Cr12 blade · air-cooled.
What control system does the machine use?
Siemens PLC/HMI · Schneider LV · Omron encoder · EN/ZH/FR · outfeed 3 m × 1 ·380 V/50 Hz / 3-phase.
Related processes
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote