Coil window
Coil window
PPGI/GI0.35–1.2 mm· width300–1250(+10) · OD≤1300 · ID 500/600 · ≤7 T.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Cut-to-Length & Leveling
Combined CTL + Slitting Line
One decoiler, two exits—choose the exit path (sheet stack vs strip recoiler) on the same host.
What this process looks like
One decoiler, two exits—choose the exit path (sheet stack vs strip recoiler) on the same host.
Level / slit
Level / slit
Level5 down + 4 up~Ø70 · slit shaftØ110·5knife pairs · min strip55 mm· tol ±0.5 mm.
Strip count vs t
Strip count vs t
0.35→14 · 0.50→12 · 0.70→11 · 1.00→7 · 1.20→5.
Specifications
| SKU | Combined CTL + slitting· shared decoil → level → slit module ↔ flip table → electric CTL / tension+recoil. |
|---|---|
| Coil window | PPGI/GI0.35–1.2 mm· width300–1250(+10) · OD≤1300 · ID 500/600 · ≤7 T. |
| Level / slit | Level5 down + 4 up~Ø70 · slit shaftØ110·5knife pairs · min strip55 mm· tol ±0.5 mm. |
| Strip count vs t | 0.35→14 · 0.50→12 · 0.70→11 · 1.00→7 · 1.20→5. |
| CTL / line | Electric upper-cut shear ≤4 kW · cycle ≤2 s · line ≤25 m/min. |
| Recoiler / scrap | Cantilever recoiler ≥11 kW · ID 600 · scrap winder ≤4 kW · OD≤800. |
| Electrics / paint | 380 V / 50 Hz / 3φ· Delta HMI EN/RU · Omron encoder/VFD/PLC · green + cream. |
Operation steps
Load 7 T hyd decoiler
Load 7 T hyd decoiler
Car lift 260 mm · ID pads for 500/600 · movable side blocks for narrow coils.
Entry level in frame
Entry level in frame
5+4 rolls ~Ø70 · handwheel gap with counter—set the gap before the knives.
Set 5-pair disc slit
Set 5-pair disc slit
Ø110 shafts · rubber rings · electric retractable support · scale 1 mm. Confirm strip count vs gauge table.
Flip table / path select
Flip table / path select
Flip deck between slit and cross shear—tooling access is part of the host.
Electric CTL or recoiler
Electric CTL or recoiler
Upper-cut shear ≤2 s to stacker wings, or tension (7 separators) + cantilever recoiler ≥11 kW.
Boundary board
Boundary board
Scope covers the combined host only—pure slit, JPX CTL, compact slitting, and diagonal/bias slit stay on their own pages.
Key details
Note 1
Keep post-forming auto-cut content on the former page.
Note 2
Publish the gauge→strip-count table; avoid inventing 20-strip claims.
FAQ
What material and thickness range does this line run?
PPGI/GI0.35–1.2 mm· width300–1250(+10) · OD≤1300 · ID 500/600 · ≤7 T.
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote