Product
Product
C/U stud· C profile with punching and logo · U profile with dimples only.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Ceiling & Drywall Framing
C/U Stud Forming with Punch & Dimple
C and U profiles share the same side-dimple pattern; the C profile adds two punch layouts plus a stamped ST logo.
What this process looks like
C and U profiles share the same side-dimple pattern; the C profile adds two punch layouts plus a stamped ST logo.
Main machine
Main machine
Arch frame · 14 forming stands · Φ50 mm Cr12 shafts · gear drive · hydraulic stop cut-off.
Power / speed
Power / speed
Main drive 5.5 kW · hydraulic 5.5 kW · punch 5.5 kW · 20 m/min with punching engaged.
Specifications
| Product | C/U stud· C profile with punching and logo · U profile with dimples only. |
|---|---|
| Main machine | Arch frame · 14 forming stands · Φ50 mm Cr12 shafts · gear drive · hydraulic stop cut-off. |
| Power / speed | Main drive 5.5 kW · hydraulic 5.5 kW · punch 5.5 kW · 20 m/min with punching engaged. |
| Material | 0.4–1.0 mm Q235 steel coil. |
| Punch / dimple | C profile: 17×95 mm (41 mm spacing) and 30×95 mm (63.5 / 92 / 152.4 mm spacing) plus ST logo · side dimples to drawing. |
| In / out / control | 1.5 t manual decoiler · 3 m run-out table · Delta / Omron / Schneider components · EN, ES and ZH interface · 220 V / 60 Hz. |
Operation steps
Load and decoil the strip
Load and decoil the strip
Mount the coil on the 1.5 t manual decoiler, expand the mandrel and feed the strip into the line.
Select the punch layout
Select the punch layout
Choose the 17×95 mm or 30×95 mm hole map; the C profile also receives the stamped ST logo.
Roll the side dimples
Roll the side dimples
Both C and U profiles are dimpled on the webs; size and pitch follow the customer drawing.
Roll form through 14 stands
Roll form through 14 stands
The arch frame carries Φ50 mm Cr12 shafts driven by a gear train for even torque across all stands.
Hydraulic stop cut-off
Hydraulic stop cut-off
The line stops for each cut, then discharges onto the 3 m run-out table. A stop cut-off holds the section steady for a clean, square end.
Profile check on outfeed
Profile check on outfeed
Confirm the finished section matches the C or U drawing before packing.
What's included
This line
C/U drywall stud: 14 stands, punch and dimple stations, 20 m/min, 0.4–1.0 mm gauge, 220 V/60 Hz.
Standard build
Stud & track, U stud, small-hat and automatic stud run on their own dedicated lines — see Related processes below.
Key details
Punching / holes
The C profile runs either the 17×95 mm or the 30×95 mm hole map; select the layout before threading the coil.
U drift control
The U profile keeps the side dimples but skips the punch station, so label the run correctly at the infeed.
FAQ
How fast does the line run and how is the sheet cut to length?
Main drive 5.5 kW · hydraulic 5.5 kW · punch 5.5 kW · 20 m/min with punching engaged.
What material and thickness range does this line run?
0.4–1.0 mm Q235 steel coil.
What control system does the machine use?
1.5 t manual decoiler · 3 m run-out table · Delta / Omron / Schneider components · EN, ES and ZH interface · 220 V / 60 Hz.
Related processes
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote