SKU class
SKU class
Ring welder package · blue.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Specialty Section Forming
Anchor Bolt Ring Welder (Disk Stations)
Operators load rebar/anchor blanks onto disk fixtures and pulse-weld rings. Show stations and mold ID plates, not forming mills.
What this process looks like
Operators load rebar/anchor blanks onto disk fixtures and pulse-weld rings. Show stations and mold ID plates, not forming mills.
Vertical machines ×2
Vertical machines ×2
Legacy vertical dual-station ring welders · weld thickness 1.2–2.5 mm · length 1.8–3 m · dia 39–51 mm · molds 39 & 51 · four 220 V single-pulse welders (independent transformers).
Horizontal machine ×1
Horizontal machine ×1
Horizontal ring welder · length 30–90 cm · dia 39 mm · mold 39 · one 220 V single-pulse welder + spare host.
Specifications
| SKU class | Ring welder package · blue. |
|---|---|
| Vertical machines ×2 | Legacy vertical dual-station ring welders · weld thickness 1.2–2.5 mm · length 1.8–3 m · dia 39–51 mm · molds 39 & 51 · four 220 V single-pulse welders (independent transformers). |
| Horizontal machine ×1 | Horizontal ring welder · length 30–90 cm · dia 39 mm · mold 39 · one 220 V single-pulse welder + spare host. |
| Wire | 0.8 / 1.0 / 1.2 mm. |
| Power (spec) | Vertical set: 220 V / 60 Hz / 3φ. Horizontal set: 220 V / 60 Hz / 3φ. |
Operation steps
Tag live mold: 39 or 51
Tag live mold: 39 or 51
Vertical set carries both mold sizes. Show the ID plate before welding so Ø claims stay honest.
Voltage nameplate check
Voltage nameplate check
Confirm nameplate 220 V / 60 Hz / 3φ on both vertical and horizontal hosts before energizing.
Pulse weld close-up
Pulse weld close-up
Wire 0.8/1.0/1.2 mm. Capture bead and fixture clamp.
Horizontal short-ring station
Horizontal short-ring station
Separate machine for 30–90 cm · Ø39 only. Include spare welder host in the kit shot.
Voltage nameplate check
Voltage nameplate check
Confirm nameplate 220 V / 60 Hz / 3φ on both vertical and horizontal hosts before energizing.
Welding station only
Welding station only
This is a ring welding cell, not a roll forming mill — there is no decoiler, no forming stands and no shear. Spiral benders and strip butt-welders are separate machines.
Key details
Note 1
Which of the three machines is live — dual vertical and horizontal look different.
Power
both vertical and horizontal hosts are 220 V / 60 Hz / 3φ — verify nameplate before energizing.
FAQ
What is the power configuration?
Both vertical and horizontal hosts: 220 V / 60 Hz / 3φ.
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote