Cable Tray Manufacturing Machine 1.2mm Reliable Order Matching
When buying a cable tray manufacturing machine, the most common question customers ask is: can this machine handle my order? Behind this question is the matching judgment between equipment parameters and order requirements.
What Does a Cable Tray Manufacturing Machine Produce
The finished product of the cable tray manufacturing machine is a cable tray housing (trough), used to support and protect cables. Finished specifications can be reviewed against actual order requirements. 100×50mm to 800×100mm is a reference range for the current confirmed configuration.
Applicable materials include Q235B cold rolled strip, hot rolled strip, and galvanized sheet. Different materials have different forming characteristics, and the equipment configuration will be adjusted accordingly.
Applications – Where the Trays Produced by This Machine Are Used
-
Data centers: large volumes of cables need support and heat dissipation
-
Telecommunications: cable management at base stations and equipment rooms
-
Industrial plants: power cable routing in production workshops
-
Commercial buildings: electrical installations in malls, hospitals, and office buildings
Different application scenarios have different requirements for tray specifications, materials, and thickness. These differences mean the equipment configuration needs to be reviewed against actual orders.
Complete Machine Parameter Table – What Information to Check Before Purchase
The complete machine parameter table for the perforated cable tray roll forming machine is a reference starting point for procurement verification. The following parameters represent a current confirmed configuration.
Parameters – Complete Machine Parameters
| Parameter | Specification |
|---|---|
| Processing thickness | 1.0 to 1.2mm |
| Coil width | 200 to 1050mm |
| Product specification | 100×50 to 800×100mm |
| Applicable materials | Q235B cold rolled strip, hot rolled strip, galvanized sheet |
| Production speed | 6 to 10 m/min, depends on hole quantity |
| Length and width tolerance | ±1.5mm |
| Angle tolerance | 90°±2° |
| Total installed power | Approx. 60KW |
| Floor space | 35×1.5×1.6m |
| Voltage | 380V 50Hz 3 phase |
| Motor explosion proof rating | ExdICT4 |
| Motor protection rating | IP55 |
Voltage can be configured as required. Other parameters are based on the confirmed configuration.
Machine Advantages – The Value of This Configuration
For the auto wire mesh cable tray making machine, similar production principles apply.
-
Continuous production: from steel coil to finished product in one pass
-
In line punching and shearing: punching and cutting completed at the same station
-
Servo feeding: precise control of feed length
-
PLC control: production parameters adjusted via touchscreen
Decision Logic for Parameter Matching
When reviewing an order on a cable tray manufacturing machine, check these conditions against the confirmed configuration:
-
Sheet thickness
-
Coil width
-
Finished product size
-
Material type
-
Required production speed
-
Required tolerances
If any condition falls outside the confirmed range, the machine configuration may need adjustment. This requires evaluation by the supplier. Thickness, width, and product specification are primary matching points. Speed and tolerance can be reviewed during configuration discussion.
Customization may involve changes to rollers, dies, or other components. The supplier needs to assess feasibility and impact.
Roller Material – Key Point for Forming Component Evaluation
Rollers are key components for forming quality on a cable tray manufacturing machine. The roller material is GCr12, with heat treatment hardness HRC 58 to 62. The shaft material is 45# steel with tempering treatment, and shaft diameter is 65mm.
During procurement, confirm the roller material and heat treatment process. This information is a reference for procurement evaluation and cannot alone prove the performance of the complete machine.
Confirm What Configuration Your Order Needs
We recommend customers provide order specifications, including sheet thickness, material type, finished product size, coil width, and planned output. Professionals will confirm the configuration of the cable tray manufacturing machine. Speed, profile type, voltage, and other parameters can be reviewed based on actual needs.
