SKU class
SKU class
Dual-head hydraulic decoiler×2(high-speed dual-head).
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Coil Handling & Decoiling
Dual-Head Hydraulic Decoiler
Load one head while the other pays off. Operators should focus on expand, press arm, rotate index, and driven feed at contract speed.
What this process looks like
Load one head while the other pays off. Operators should focus on expand, press arm, rotate index, and driven feed at contract speed.
Capacity
Capacity
4 t per side· remote control rotates both heads.
Strip
Strip
Max strip width 400 mm · thickness 3 mm.
Specifications
| SKU class | Dual-head hydraulic decoiler×2(high-speed dual-head). |
|---|---|
| Capacity | 4 t per side· remote control rotates both heads. |
| Strip | Max strip width 400 mm · thickness 3 mm. |
| Payoff | Active / driven· max 50 m/min. |
| Arms / brake | Press arm·pneumatic brake. |
| Electrics / HMI | 440 V / 60 Hz / 3φ·EN + ES only· blue/yellow. |
| Same order companion | Semi-auto shear-butt joiner →. |
| Visual note | Board photo is sibling dual-head class (3T US)—do not overwrite primary 4 t. |
Operation steps
Load the standby head
Load the standby head
4 t per side specification. Film coil ID and eye size before expand—never invent a coil car if this install has none.
Expand and center
Expand and center
Hydraulic expand grips the eye. Off-center coils walk at 50 m/min—gate before rotate.
Press arm + pneumatic brake
Press arm + pneumatic brake
Sheet requires both. Film arm down and brake manners on start/stop—loose tails whip.
Remote-rotate both heads
Remote-rotate both heads
Index the loaded head into the line path. Clear swing zone—people and forklifts out of arc.
Active payoff to line
Active payoff to line
Driven feed up to 50 m/min into the next specification (often joiner then former). Loop height is the speed story.
Tag joiner separately
Tag joiner separately
The same order family has shear-butt joiners. Do not paste weld clips into this decoiler page.
Key details
Note 1
Strip width is specified in millimetres (max 400 mm).
Note 2
Reference still may be a 3T sibling. On-camera nameplate / build tag must say 4 t per side for this specification.
FAQ
What material and thickness range does this line run?
Max strip width 400 mm · thickness 3 mm.
What control system does the machine use?
440 V / 60 Hz / 3φ·EN + ES only· blue/yellow.
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote