Global B2B Roll Forming Sourcing Platform | Free RFQ Response within 24h

Process Library · Specialty Section Forming

Vent Panel Roll Forming

Vent order-spec board + scrap-cut station + language pack are the focus.

Vent panel roll formingventilated cladding machine

What this process looks like

Vent order-spec board + scrap-cut station + language pack are the focus.

Material

PPGI/PPGL/Q345 · 0.3–0.6 mm · feed453 mm.

Decoiler

3 T manual · ID 450–550.

Forming

12 stands · Ø55 · mid-plate 18 · 4 kW chain · 0–12 m/min · hand cutter · lift hooks.

Material	PPGI/PPGL/Q345 · 0.3–0.6 mm · feed453 mm.
Decoiler	3 T manual · ID 450–550.
Forming	12 stands · Ø55 · mid-plate 18 · 4 kW chain · 0–12 m/min · hand cutter · lift hooks.
Cut	Hydraulic · CR12 · 4 kW · fan · long hoses ·auto lube·scrap cut after form.
Controls	Delta · local/EN/ZH · Schneider · aviation plugs ·no password.
Util	380V/50Hz · blue · 3 m table.

Vent pattern board

Pattern readable beside first-off.

12-stand form

Slow enough to see vent features develop.

Hydraulic cut + lube

Show auto lube working during cut cycle.

Scrap cut

After-form scrap cut is mandatory on this sheet.

Local/EN/ZH pages

Language tour without passwords.

Distinct from power-wall vents

US power-wall uses separate vent-roll stands—separate process page.

After-form scrap cut is explicit—avoid omitting it.

Power-wall uses dedicated vent-hole rolls on a 240 V 1φ host.

What material and thickness range does this line run?

PPGI/PPGL/Q345 · 0.3–0.6 mm · feed453 mm.

What auxiliary equipment comes with the line?

3 T manual · ID 450–550.

How fast does the line run and how is the sheet cut to length?

Hydraulic · CR12 · 4 kW · fan · long hoses ·auto lube·scrap cut after form.

What control system does the machine use?

Delta · local/EN/ZH · Schneider · aviation plugs ·no password.

Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.