Standing Seam Slide Forming

What this process looks like

This is a host architecture first.

Host architecture

Guide-pillarauto-slide design · 400H beam frame.

Package scope

No decoilerin major units · infeed with manual pull-cut + film rack · outfeed tables 3 m × 2.

Materials

PPGI / PPGL · thickness0.5 mm· stated infeed widths460 mm & 625 mm.

Specifications

Host architecture	Guide-pillarauto-slide design · 400H beam frame.
Package scope	No decoilerin major units · infeed with manual pull-cut + film rack · outfeed tables 3 m × 2.
Materials	PPGI / PPGL · thickness0.5 mm· stated infeed widths460 mm & 625 mm.
CAD profile families	7drawings total ·4profiles infeed416 mm·3profiles infeed625 mm— CAD board is the reference when numbers differ from the materials line.
Notch	Hydraulic notch for later bend · with oiler.
Forming	20passes · shafts 45# Ø70 mm· rollers 45# chrome · piercing / break-hole rollers· chain drive · ~8 m/min· main motor7.5 kW.
Width adjust	Motors2×0.75 kW + 1×1.5 kW.
Finish cut	After form:hydraulic cut + bend· with oil system.
Controls	Vertical PLC cabinet · Delta VFD/PLC · Schneider LV · Omron counter · HMI languagesZH / EN / RU· order log kept10–14 daysby date.
Power / color	380 V / 50 Hz / 3Ph · main frame grey.

Operation steps

Infeed with film (no decoiler in package)

Strip enters under rack with a manual pull-cut. The infeed starts at rack, not at a decoiler.

Hydraulic notch for later bend

Notches land where bends will happen. The oil mist protects the coating and tooling — this is the step that makes the bent end possible.

Slide forming on guide pillars

The wide shot shows the guide-pillar frame, width-adjust motors and chain guards. Pierce / break-hole rollers are part of the build where the profile uses them.

Cut and bend after form

Downstream hydraulics cut and bend. show a panel that showsstraight end + bent endwhen that is the agreed recipe.

Outfeed tables

This package ships two 3 m tables. A wide frame of table length against panel drop prevents day-one layout questions.

HMI languages and order log

ZH / EN / RU menus. The vertical cabinet keeps a completed-order log by date for 10–14 days.

What's included

This line

Guide-pillar / auto-slide standing-seam hostwith hydraulic notch, progressive form, hydraulic cut+bend, multi-profile CAD, usually without decoiler. The live silhouette follows the CAD board for the profile running now.

Standard build

Guide-pillar frame, hydraulic notch + oiler, 20-pass forming with width-adjust motors, Delta PLC/HMI in ZH/EN/RU, and 3 m×2 outfeed tables.

Key details

Note 1

Major units start at the infeed rack.

Note 2

Straight+bent ends may share one drawing. show the agreed sample ends, keeping to the confirmed angles.

FAQ

How is the forming frame built?

Guide-pillarauto-slide design · 400H beam frame.

What material and thickness range does this line run?

PPGI / PPGL · thickness0.5 mm· stated infeed widths460 mm & 625 mm.

What profile and cover width can this machine produce?

7drawings total ·4profiles infeed416 mm·3profiles infeed625 mm— CAD board is the reference when numbers differ from the materials line.

How fast does the line run and how is the sheet cut to length?

After form:hydraulic cut + bend· with oil system.

What control system does the machine use?

Vertical PLC cabinet · Delta VFD/PLC · Schneider LV · Omron counter · HMI languagesZH / EN / RU· order log kept10–14 daysby date.

What is the power and hydraulic configuration?

380 V / 50 Hz / 3Ph · main frame grey.

Related processes

Get a configured quote

Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.

Request a quote

Language

Currency