SKU class
SKU class
Perforated punch line · decoil → level → punch → level + hyd cut.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Punching / Shearing / Notching
Standalone Perforated Sheet Line
Perforated punch line: 5T decoil→level→200t servo punch→level+hyd cut; 0.5–0.8×1000; Ø5/pitch7; 11-roll level φ80; 415V50Hz.
What this process looks like
This page focuses on perforated sheet quality. The pattern board is the spec before the press fires.
Decoiler
Decoiler
5 t hyd + car · ID 470–525 · press arm · air brake · remote · 4 kW hyd / 5.5 kW main.
Punch
Punch
200 t · servo feed · 30 kW · oil before punch · 2–3 rows · Cr12MoV detachable punches.
Specifications
| SKU class | Perforated punch line · decoil → level → punch → level + hyd cut. |
|---|---|
| Decoiler | 5 t hyd + car · ID 470–525 · press arm · air brake · remote · 4 kW hyd / 5.5 kW main. |
| Punch | 200 t · servo feed · 30 kW · oil before punch · 2–3 rows · Cr12MoV detachable punches. |
| Strip / holes | 0.5–0.8 mm carbon steel · width 1000 mm · Ø5 / pitch 7. |
| Exit | 11-roll level (φ80) + hyd cut Cr12MoV · no factory outfeed table. |
| Electrics | 415 V / 50 Hz / 3φ · 2-year warranty class note. |
Operation steps
Load 5 t hyd decoiler
Load 5 t hyd decoiler
Car + press arm + air brake. Width lock at 1000 mm.
Entry level
Entry level
11 rolls · φ80 · 40Cr chrome. Flatness before dense punch.
Servo punch fire
Servo punch fire
200 t · oil mist · 2–3 rows · Cr12MoV punches. Capture the hole edge.
Hole quality macro
Hole quality macro
Ø5 / pitch 7 vs sample drawing.
Exit level + hyd cut
Exit level + hyd cut
Second 11-roll level (φ80) then hyd shear. Outfeed table is customer-local (not factory-supplied).
Boundary with acoustic path
Boundary with acoustic path
This page has no roll-forming host—don't reuse acoustic-line clips.
Key details
Punching / holes
Publish punch-line numbers only for this perforated path.
Note 2
Specification skips the factory run-out table; confirm drawing handoff for outfeed.
FAQ
What material and thickness range does this line run?
0.5–0.8 mm carbon steel strip, width 1000 mm, Ø5 / pitch 7 hole pattern (confirm drawing).
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote