Order
Order
Dual-layer former · lower deck = PBR.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Roofing & Wall Panel
PBR Panel Roll Forming
Send us your gauge range, deck layout, and required speed. We return a confirmed specification and lead time.
What this process looks like
Send us your gauge range, deck layout, and required speed. We return a confirmed specification and lead time.
Stock (lower)
Stock (lower)
PPGI · 0.45–0.6 mm (upper seam window 0.47–0.6 mm on the same order).
Former
Former
Mid-plate · 350# H frame · 18/18 · Ø80 · 45# · 1.2″ dual chain.
Specifications
| Order | Dual-layer former · lower deck = PBR. |
|---|---|
| Stock (lower) | PPGI · 0.45–0.6 mm (upper seam window 0.47–0.6 mm on the same order). |
| Former | Mid-plate · 350# H frame · 18/18 · Ø80 · 45# · 1.2″ dual chain. |
| Drive / cut | Siemens main 7.5 kW · hyd guide-pillar cut · hyd 5.5 kW · ≤25 m/min. |
| Infeed sibling | 5 t hyd decoiler + car · ID 450–530 · ≥11 m rail · Siemens motors · 240 V/60 Hz/3φ. |
| HMI / paint | 10″ HMI · inch units · ZH/EN · white RAL7035 + grey RAL 7015 guards. |
| Profile | PBR lower-deck board — bearing return at the lap. |
Operation steps
Lock the PBR board
Lock the PBR board
Confirm the purlin bearing return at the side lap before cutting clips.
Form on lower deck
Form on lower deck
Run the 18-stand lower path; keep the upper standing-seam deck as a separate process.
Hyd cut + nest
Hyd cut + nest
Guide-pillar hyd cut; nest with PBR-only pack tags.
What's included
This line
PBR (Purlin Bearing Rib) lower-deck build: 0.45–0.6 mm, 18 stands, 240 V/60 Hz, bearing return at lap.
Standard build
R-panel, clip-lock / snap-lock and standing-seam upper decks each run on their own dedicated lines.
FAQ
How fast does the line run and how is the sheet cut to length?
Siemens main 7.5 kW · hyd guide-pillar cut · hyd 5.5 kW · ≤25 m/min.
What control system does the machine use?
10″ HMI · inch units · ZH/EN · white RAL7035 + grey RAL 7015 guards.
What profile and cover width can this machine produce?
PBR lower-deck board — bearing return at the lap.
Related processes
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote