Marketing profiles (3-in-1 brief)
Marketing profiles (3-in-1 brief)
R panel·Clip lock panel·Snap lock panelon one space-limited host.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Roofing & Wall Panel
Clip-Lock / Snap-Lock Multi-Profile Forming
Trade names blur. Accuracy starts by separatinghow panels join on the rooffromwhich path is running on the former.
What this process looks like
Trade names blur. Accuracy starts by separatinghow panels join on the rooffromwhich path is running on the former.
Spec-sheet architecture (same order family)
Spec-sheet architecture (same order family)
Dual-layer former· mid-plate · 350# H frame ·18 / 18passes · Ø80 · 45# rollers · 1.2″ dual chain · hydraulic guide-pillar cut · Siemens motors noted · PLC · ZH/EN · inch units · 240 V 60 Hz.
Upper path (spec)
Upper path (spec)
Two standing-seam specs · material thickness0.47–0.6 mm·nail holes realized by rollers(nail holes made by rollers).
Specifications
| Marketing profiles (3-in-1 brief) | R panel·Clip lock panel·Snap lock panelon one space-limited host. |
|---|---|
| Spec-sheet architecture (same order family) | Dual-layer former· mid-plate · 350# H frame ·18 / 18passes · Ø80 · 45# rollers · 1.2″ dual chain · hydraulic guide-pillar cut · Siemens motors noted · PLC · ZH/EN · inch units · 240 V 60 Hz. |
| Upper path (spec) | Two standing-seam specs · material thickness0.47–0.6 mm·nail holes realized by rollers(nail holes made by rollers). |
| Lower path (spec) | PBR panel· PPGI0.45–0.6 mm— belongs to the PBR panel page, not this page's lock story. |
| Line manners (spec) | Operators on theright(left infeed) · match decoiler / host / stacker direction · speed class up to~25 m/min· 5 t hydraulic decoiler + car on ~11 m rails. |
Operation steps
Declare which lock is live
Declare which lock is live
On a 3-in-1 / dual host, photograph the tool/recipe selection. Idle paths (R, PBR lower, other seam) stay labeled idle. A shared frame is not permission to blend profiles.
Hang the matching section board
Hang the matching section board
Coverage, seam/leg height, male/female lock sketch. Separate boards for clip-lock vs snap-lock if both exist. Never a single "standing seam" mush board.
Form only the live path
Form only the live path
For this dual-layer family, that is typically anupperstanding-seam path. The lower PBR ribbon is a separate profile and is not presented as clip-lock.
Macro the lock geometry
Macro the lock geometry
Snap-lock must show the snap engagement. If the profile includes roller-made nail holes (spec note), show the hole pitch against the drawing—never show holes the live drawing does not call for.
Dry-fit install hardware separately
Dry-fit install hardware separately
If the system uses concealed deck clips, show the view under the seam as aseparateshot from the panel snap. Hardware missing from the crate is a packing fail, not a forming success.
Tag the lock SKU
Tag the lock SKU
Pack label must say Clip-lock or Snap-lock (as ordered). Mixed nests from a multi-former shift are a process fail.
What's included
This line
Clip-lock / snap-lockprofiles on a multi-profile (or dual-layer) host: live recipe, lock geometry, optional roller nail holes, correct tags. Snap-lock = snap engagement without a seamer fold as the join method.
Standard build
3-in-1 host running R / clip-lock / snap-lock on one frame; dual-layer build with an upper standing-seam path and a lower PBR path; operates at up to ~25 m/min with a 5 t hydraulic decoiler + car.
Key details
Note 1
The task family puts standing-seam profiles upstairs and PBR downstairs. Cutting to the wrong ribbon is a profile fail, not a "dual-line highlight.".
Note 2
Task notes inch length units. Show the recipe screen once so the inch units are clear and the scrap story stays consistent.
FAQ
What profile and cover width can this machine produce?
R panel·Clip lock panel·Snap lock panelon one space-limited host.
Related processes
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote