Product
Product
High-speed framing line· stud & track sections · small lip · full web dimples.
- Tuo AI
- Live
- My Account
- Shopping Cart
- Inquiry Basket
- Contact Us
- Back to Top
Process Library · Ceiling & Drywall Framing
Stud & Track High-Speed Light-Gauge Forming
Web dimpling, five punch stations and automatic PP stacking define this line — it is built for volume framing output.
What this process looks like
Web dimpling, five punch stations and automatic PP stacking define this line — it is built for volume framing output.
Main machine
Main machine
Cast stands 4+16· Φ70mm · Cr12 shafts · gearbox drive.
Material / decoiler
Material / decoiler
0.39–0.81 mm GI coil · dual-head hydraulic decoiler, 3 t.
Specifications
| Product | High-speed framing line· stud & track sections · small lip · full web dimples. |
|---|---|
| Main machine | Cast stands 4+16· Φ70mm · Cr12 shafts · gearbox drive. |
| Material / decoiler | 0.39–0.81 mm GI coil · dual-head hydraulic decoiler, 3 t. |
| Punching / speed | 5 punch stations plus one cut-off · up to 70 m/min. |
| Packing / control | Inkjet marking · automatic stacker · PP strapping · remote support · Siemens preferred · PLC cabinet · EN and ES interface. |
| Power / finish | 380 V / 50 Hz / 3-phase · machine colour to customer choice. |
Operation steps
Load the dual-head decoiler
Load the dual-head decoiler
Two hydraulic heads let the next coil be prepared while the current one runs, keeping the line fed.
Dimpling and five punch stations
Dimpling and five punch stations
Webs are fully dimpled and punched in one pass; hole patterns follow the approved drawing.
Roll form through 4+16 stands
Roll form through 4+16 stands
Cast stands driven by a gearbox bring the strip to the finished section, including the small return lip.
Hydraulic cut-off
Hydraulic cut-off
A single cut-off station downstream of the punches trims each piece to the programmed length.
Inline inkjet marking
Inline inkjet marking
Each section is marked automatically so size and batch stay traceable after bundling.
Automatic stacking and strapping
Automatic stacking and strapping
Finished sections are collected by the automatic stacker and secured with PP strapping ready for despatch.
What's included
This line
High-speed stud & track: 4+16 cast stands with gearbox drive, 0.39–0.81 mm gauge, up to 70 m/min, five punch stations plus cut-off, inkjet marking and PP stacking, 380 V/50 Hz.
Standard build
Dual-head 3 t hydraulic decoiler, 4+16 gearbox stands, five punch stations with full web dimples, hydraulic cut-off, inline inkjet marking, and an automatic stacker with PP strapping.
Key details
Note 1
Every web is dimpled on this line; if a project does not want dimples, the roll set has to be specified differently at order stage.
Punching / holes
The 70 m/min figure is the mechanical top speed. With five punch stations working, the achievable average depends on hole pitch.
FAQ
What material and thickness range does this line run?
0.39–0.81 mm GI coil · dual-head hydraulic decoiler, 3 t.
How fast does the line run and how is the sheet cut to length?
5 punch stations plus one cut-off · up to 70 m/min.
What control system does the machine use?
Inkjet marking · automatic stacker · PP strapping · remote support · Siemens preferred · PLC cabinet · EN and ES interface.
What is the power and hydraulic configuration?
380 V / 50 Hz / 3-phase · machine colour to customer choice.
Related processes
Get a configured quote
Send us your profile sizes, gauge and daily output — we return a sized proposal with lead time.
Request a quote